Skip to main content

Porsche Connection Tips

Porsche Connection Tips

On 1996-1998 Porsche 911s the immobilizer (drive block system) may prevent scan tools from connecting normally. To connect your BlueDriver to a 993 Porsche:

  1. Use the keyfob to unlock the door
    ​

  2. Start the ignition
    ​

  3. Plug in your BlueDriver
    ​

  4. Press and hold the unlock button until the Drive Block light goes out
    ​The immobilizer light can be found on the clock on the right hand side of the instrument cluster below the 3 and has an image of a keyfob on it
    ​

  5. Start the app and connect
    ​
    ​Note: if still unable to connect, after the immobilizer light goes out you may need to remove your BlueDriver and then plug it in again.

Did this answer your question?