- Start the ignition and plug in your BlueDriver
- Start the BlueDriver app
- Find the "More" tab
- Select "Update Sensor F/W"
- Tap "Check For Updates"
- Wait for the update to download
- Tap "Connect" and select your BlueDriver
- Tap "Update Sensor"
If a firmware update is interrupted you will see a solid red light illuminated on your BlueDriver indicating it is in recovery mode. When this happens you will not be able to connect as you would normally when starting the app - after opening the app cancel the connection attempt and then follow the above steps and you'll be back up and running ASAP!